Analytic Systems BCA1005W-12

SKU: BCA1005W-12-CT-BC-CA
80A, 12V Out, 110V/220VAC In, AC/DC Battery Charger, 2 Bank, IP66
Sector:
Material Handling, Switchgear
Need:
Minimum Quantity
1
My Wishlist
Compare
H-14-16w.png
Description

The BCA1005MW-29.2EBT battery charger provides up to 1000 watts to charge a one or two bank lithium ion battery system at 24 volts nominal from a 110 or 220 VAC source. The batteries must share a common ground.

The extruded aluminum chassis and billet machined front and rear covers are designed to be dust proof and water resistant to the IP66 standard. An optional upgrade to full IP67 certified (1 meter submersion for 30 minutes) is available.

The single board design incorporates state of the art switch- mode technology for unmatched efficiency and ultra quiet operation. Multiple stages of filtering reduce radiated and conducted noise to very low levels. Extra features include visual indicators for low input voltage, charging and over temperature.

Features
  • 150 watts of charging power
  • Two or three bank charging
  • Temperature compensation
  • Manual equalization mode
  • Two or three stage charging profiles
  • Low EMI
  • Adjustable float voltage
  • Three year parts and labour warranty
  • Typical Service Life : > 10 years (87,600 hrs)

Details

Input Voltage: 90 - 130 VAC
Input Current: 3 Amps with Inrush Protection
Input Frequency: 45 - 65 Hz
Efficiency: > 90 % at Full Load
Power Factor: > 0.98 at Full Load
Constant Output Voltage: 12V
Output Current: 80A
Duty Cycle: Continuous
Stages: 2 or 3 stage user selectable
Operating Temperature: -25°C to +40°C @ maximum output. Derate Linearly 2.5% per °C from 40°C
Humidity: 0 - 95% Relative Humidity (non-condensing) with standard conformal coating
Switching Frequency: 45-65 ± 5% kHz
Phase: Single Phase
Isolation Input-Case: > 1500 VDC
Isolation Input-Output: > 1500 VDC
Isolation Output-Case: > 1500 VDC
Input Fuse: MDA-20
Output Fuse: ATC-40 x2
Length: 36.8 CM
Width: 25.1 CM
Height: 12.7 CM
Weight: 5.5 KG

Construction

  • Material and Finish : Marine Grade Black Anodized Aluminum with 18-8 Stainless Fasteners
  • Wall Mount (With Drip Shield)
  • Connections : AC Input - IEC Inlet 26.4mm Tab Flange Mount, DC Output - Phoenix VDFK 4 Connector (Black and Red)

Applications

  • Military
  • Industrial
  • Telecommunications
  • Transportation
  • Alternative Energy

Standards

  • Emissions Meets FCC Part 14, Class B
  • Warranty : Three Years Parts and Labor
  • Safety Built to meet CSA C22.2 No.107.1 and UL 458